To view SNMP settings configured on the switch, use the following command:
show switch managementThis command displays the following information:
- Enable/disable state for Telnet and SNMP
access
- Login statistics
- Enable/disable state for idle
timeouts
- Maximum number of CLI sessions
- SNMP community strings
- SNMP notification type (trap or
INFORM)
- SNMP trap receiver list
- SNMP trap receiver source IP address
- Authentication trap configuration
- SNMP statistics counter
- SSH access state (enabled/disabled).
- CLI configuration logging
- SNMP access states of v1, v2c disabled
and v3 enabled
- Access-profile usage configured via ACLs
for additional Telnet, SSH2 security, SNMP, and HTTP(s)
- CLI scripting settings
- Enable/disable state
- Error message setting
- Persistence mode
- Dropped SNMP packet counter
